Hello we have a 30 gallon tank and sewage pump servicing a laundry, kitchen sink and toilet. The setup works for the most part but requires periodic cleaning. What can be done to stop the build up of solid material on the side of the tank. It cakes on the sidewalls to the point where the float will not operate. Is this normal? Is there anything you can add that dissolves the build up material. Would appreciate your suggestions or advice with this very messy problem.

Thanks,

Karl

Sounds like your are getting grease buildup from the kitchen sink. Mine has the same setup minus the kitchen and has worked flawlessly for 5 years. Eliminate any grease and you should see improvement. There is nothing you can add.

Grease and lint build up. Can't get away from that. Brian's bang on! Nothing you can add, Just bite the bullet and continue to clean the tank, Good luck, Tom