Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Tools & Power Equipment (https://www.askmehelpdesk.com/forumdisplay.php?f=334)
-   -   Craftsman Weedeater Starter Rope Replacement (https://www.askmehelpdesk.com/showthread.php?t=72565)

  • Mar 15, 2007, 07:46 PM
    cochiese
    Craftsman Weedeater Starter Rope Replacement
    I'm trying to replace the starter rope on my Craftsman Weedeater.
    Can you tell me how to remove the clutch assembly from the shaft?
  • Mar 16, 2007, 08:34 AM
    ballengerb1
    This item is probably made by Poulon so you may want to check their manuals too. Can't help further since my last replacement did not require clutch removal. Soory
  • Mar 16, 2007, 09:32 PM
    newaukumdon
    Clamp and set screw removes it from shaft. If you are referring to crankshaft you would insert a piston stop in cylinder or in the absence of piston stop nylon rope can be used. Grab clutch by whatever means available, I use a couple small screw drivers verticle and put a lever between them. Turn clockwise to loosen.

    Don

  • All times are GMT -7. The time now is 06:18 AM.