I have a GE Gas Dryer about 10 years old. It was making noise so I took it apart and replaced the Rear Bearing and shaft. The Squeaking noise stopped but now the gas will come on, the igniter lites it, but it goes out fairly quick and does not come back on. What should I replace now?

Flame sensor problem. Would need make and model to help further

About any part is good as any other one, but what you need to do is clean it out very well and check the sensors because when the pipes inside are dirty it will turn off dryer when it gets a little bit hot because the sensors are very hot and when they are insulated with dirt they turn off before the dryer gets hot enough. Here are some manuals: https://dl.dropbox.com/u/8010163/GE%...%20Manuals.zip