Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Appliances (https://www.askmehelpdesk.com/forumdisplay.php?f=157)
-   -   Maytag fridge freezer interior panel (https://www.askmehelpdesk.com/showthread.php?t=715531)

  • Nov 9, 2012, 07:20 PM
    Valman1
    Maytag fridge freezer interior panel
    Can anyone please tell me where I can purchase the plastic interior freezer door panel on a Maytag double door fridge freezer. The panel need not be new but must be in good serviceable condition.

    Mine hasthe basket fixing holes cracked and now too large to hold the basket (only one broken).

    Many thanks everyone!
  • Nov 9, 2012, 09:52 PM
    ma0641
    Other then through a parts house, look for used appliance dealers in your area. Nothing is sold through this site.
  • Nov 9, 2012, 10:08 PM
    ma0641
    Other then through a parts house, look for used appliance dealers in your area. Nothing is sold through this site.
  • Nov 10, 2012, 12:17 AM
    drtom4444
    Why not try to fix it? What is important is to make sure the hole is sealed from air entering. You can take a piece of Plexiglas or even aluminum, drill a hole in each end and glue over present holes. That should work. If you are determined to replace it, make sure to seal all around the edges with GE Silicone to make it totally air tight. GE had a recall on a whole line of refrigerators because the freezer doors were not air tight which caused all kinds of failures.

  • All times are GMT -7. The time now is 06:16 PM.