Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Mechanical Engineering (https://www.askmehelpdesk.com/forumdisplay.php?f=494)
-   -   I want to decrease the clamping force of the cylinder by reducing pressure without di (https://www.askmehelpdesk.com/showthread.php?t=711186)

  • Oct 23, 2012, 07:47 AM
    Rama Hegde
    I want to decrease the clamping force of the cylinder by reducing pressure without di
    In my fixture two operation to be done. Milling and boring in vertical CNC machine.
    Sequence of operation is
    1.Clamp the cylinder in 30 bar (900 kg force)
    2.milling operation.
    3.bring down the clamping cylinder pressure to 10 bar (300 kg force) without disturbing the clamps.
    4. boring operation.

    How to design the hydraulic circuit.

    • All times are GMT -7. The time now is 01:27 PM.