Can you give out this type of information.

I need to replace my ESL Model #709-2.

Wire colors are as follows:
Pigtail connector top to bottom... yellow, black, green, white.
Are these standard colors.

Do I have to match the Pigtail connector to the new smoke detector?


Thanks for any help you can give me.

Glenda

Yes, that is standard. Black is hot, white is neutral, green is ground and.yellow is the traveler wire connecting them together. We typically install Firex and all their connectors are the same, even among different models.

Quote:

---

Originally Posted by ma0641

Yes, that is standard. Black is hot, white is neutral, green is ground and.yellow is the traveler wire connecting them together. We typically install Firex and all their connectors are the same, even among different models.

---

So you are saying Firex good brand. Will it have a pigtail connector or will I need to connect it directly to the wires in the wall using those screw on things.
Sorry the name just went out of my head :)

Thanks for the info so fast.

Glenda

Firex is a good brand, UL approved. It will have pig tails on the connector. If the old ones don't connect directly you can use them. If not you will need to use the wire nuts. -the screw on things! I have used Firex for 15 years and never had an issue. Why are you replacing yours?

It is so old. And it is chirpping like a bird even though I disconnected the pigtail connector. It won't stop chirpping. So I assume it's gone.

Thanks for the info. Will look into Firex.

Glenda

Quote:

---

Originally Posted by digerdo2

It is so old. And it is chirpping like a bird even tho I disconnected the pigtail connector. It won't stop chirpping. So I assume it's gone.

thanks for the info. Will look into Firex.

Glenda

---

Did you replace the battery? Even though it is hard wired it has a battery backup. When connected you should see a constant green diode light and a periodically flashing red one.

Quote:

---

Originally Posted by ma0641

Did you replace the battery? Even though it is hard wired it has a battery backup. When connected you should see a constant green diode light and a periodically flashing red one.

---

There is no green diode light. Where would the battery be. I sure don't see one.
ESL Model 709-2 The instruction booklet seems to be for another model.

Energizing Detector
"The detector is energized by turning on the power to the detector circuit and placing cover on the detector. As the cover is put in place, a subdued red light will come on. This light is always lit during normal operation".

I have the cover off and the pigtail connector pulled out and it still chirps.

Glenda

So it sounds like you have a hard wired unit only that is tied to all of the others. Are all wires connected when the connector is in place? By that I particularly mean the yellow one. Code today requires hard wired and battery backup so if power fails you still have a battery. The Firex unit I typically use is a Model 4618 with a front battery compartment. . Google that for details. If it is still beeping after being disconnected for this long, I think there is a battery somewhere..

Quote:

---

Originally Posted by ma0641

So it sounds like you have a hard wired unit only that is tied to all of the others. Are all wires connected when the connector is in place? By that I particularly mean the yellow one. Code today requires hard wired and battery backup so if power fails you still have a battery. The Firex unit I typically use is a Model 4618 with a front battery compartment. . Google that for details. If it is still beeping after being disconnected for this long, I think there is a battery somewhere..

---

I feel so stupid. You are right there was a battery going bad, but it wasn't on the hard wired detector. Directly across from the hard wired is a battery operated smoke detector. That was the one that needed a new battery. It sounded like the noise was coming from the hard wired detector. So I found out by taking the hard wired detector out. As soon as I was done I heard the chirp again but this was coming from the other (battery) smoke detector. So I bought new batteries for both battery operated smoke detectors and put the hard wired smoke detector back up. Everything is working just fine now.

... Oh it's not fun getting old.

Thanks for all your help. I did learn new things through this exercise!!

Glenda

Glenda, wasn't she the good witch in Wizard of OZ? Getting old -hmm hit the big 71 this year, tell me! Glad we could help you and keep asking the questions when you need help. Brian

No that was Glinda the good witch. Not there in age yet but sometimes I sure wonder.
Thanks Brian for all your help.

Glenda