Windows XP update failures after Service Pack 2 installation
Since installing XP Service Pack 2, the few updates that have occurred subsequently have all failed to install after downloading. Downloading seems to reach 95% completion normally and then slows right down. 'failed' then appears against the update name.
Software failure after installing Service Pack 2
Make sure your firewall settings are not to high,otherwise you may experience problems.If you use dial-up to connect to the net,make sure you have a good download manager installed.Once sp2 is installed,even if you get cut off and have to reconnect to the net,your downloads should pick up from where you left off.
I know you probably have,but check your anti-virus software,use spybot 1.3,Adaware,clear old useless progs.from off your PC,defragment your hard drive at least once a month,turn off picture display on your desktop,to free up more processing power.Yes a tiny jpg image may look nice,but you'l be surprised what happens to your PC on start-up.
If you use broadband,check with your isp that engineers are'nt in your area.Check all your modem connections yourself.
Like a lot of Windows apps, it's a case of hit and miss.Some people have no trouble,whilst others hit a brick wall.The extreme measure would be to delete your copy of sp2,and get another.Annoying I know,but just a silly thought.
I hope this helps a llittle.
Good luck.