I just moved into a trailer that is 16 years old. It is on a private lot so we are on a well. After moving the trailer on the lot we hooked the water up including holding tank. After getting trailer set up we discovered we have great hot water pressure but very little cold water. So I replaced pressure switch and gauge. I'm getting about 40 pounds of pressure. We have three faucets and two baths and they are all the same. Both toilets take forever to feel up after flushing. Please we need help. Thanks.

Hi blackwell and welcome to The Plumbing Page at AskMeHelpDesk.com

Quote:

---

I'm getting about 40 pounds of pressure.

---

What's the cut in/
Cut out point on the control box? What material are the water pipes? Back to you. Tom

It's 20/40. All pipes are plastic.

Quote:

---

I'm getting about 40 pounds of pressure.

---

That's all the control box is asking for. Would you like instructions on how to increase your pressure? Back tom you. Tom

Quote:

---

Originally Posted by speedball1

That's all the control box is asking for. Would you like instructions on how to increase your pressure? Back tom you. Tom

---

Yes

Quote:

---

Originally Posted by mommad1226

Yes

---