I purchased and installed your PR 180 occupancy sensor to automatically turn the light in the hall. The light comes on and shuts off in 30 secs. The problem is that it does not stay off. In a second or two it comes back on and continues to recycle and recycle. I have turned the sensitivity down to it's lowest setting and it continues to do the same thing.

I have hooked the black, white and green wires up (single pole). Can you help me?

Tom ([email protected])

You should have it wired correctly, pretty simple.

You should call their help desk for advice;

Tech Line (8:30AM-7:30PM E.S.T. Monday-Friday): 1-800-824-3005