My washer won't fill with cold or hot water

First question (sorry if it's obvious): did anyone turn off the valve or valves next to the washer? Some have a single lever that turns up or down, or sideways, to turn on and off.

Yes the valves are on

I guess all our plumbers are on holiday.
I'm going to take a wild guess and suggest that you move the knob to the next step after fill, and see if it starts to turn.
Maybe there is a circuit board controlling each step and the fill circuit is loose or disconnected/broken.

Either the water level switch is bad or the tubing going from it to the tub is clogged, or you have a problem with the valves such as stopped up screens or bad solenoids. Here are the manuals: https://dl.dropbox.com/u/8010163/Und...c%20washer.pdf
https://dl.dropbox.com/u/8010163/Whi...%20washers.zip
https://dl.dropbox.com/u/8010163/How...e%20Manual.pdf
https://dl.dropbox.com/u/8010163/Ken...ng_Machine.pdf
https://dl.dropbox.com/u/8010163/Ken...sher_Elite.pdf