92 ranger 3.0 won't start. Take gas on a rag will start. Fuel pump runs all the time when key is turned on. Idles good,give it gas it acts like flooding out. Replaced plugs wires distributor cap rotary button 3 relays under fuse box plugs fuel filter new fuel pump various sensors still no start unless I gas a rag.

Replace the Ignition Control Module (ICM).

Quote:

---

Originally Posted by TxGreaseMonkey

Replace the Ignition Control Module (ICM).

---

Changed ignition control module and put new distributor starts and runs it did solve the fuel pump running all the time for a bit but now fuel pump back to running all the time. Thinking bad ground

Fuel pump grounding is often through the ECM. Try cleaning the main ECM ground; otherwise, it may be a bad ECM.

Quote:

---

Originally Posted by TxGreaseMonkey

Fuel pump grounding is often through the ECM. Try cleaning the main ECM ground; otherwise, it may be a bad ECM.

---

t
Tx

Quote:

---

Originally Posted by DangerRanger92

t
Tx

---

TxGreaseMonkey thanks for all you advice on the 92 Ranger. It is running great. No hesitation anymore. Thanks again