I have a whirlpool dishwasher, GU2400XTPT7. The normal and glass xpress lights started flashing and it won't respond when I push any of the buttons. I've tried several reset methods, but nothing happens, and I've checked breakers. Does anyone have other suggestions?

See if these help: https://dl.dropbox.com/u/8010163/Whi...ishwashers.zip

Reset Frigidaire dishwasher

How to reset Frigidaire dishwasher.Most lights are on.Drain OK

Here are some manuals to help: https://dl.dropbox.com/u/8010163/Fri...ishwashers.zip
You need to find the problem and fix it if there is one. Look for stuck floats, stopped up filters and drains, etc. Some things will require a meter. You should have a good volt/ohm meter if you are a home owner and know how to use it because you can fix almost anything by using a meter. Here is a book to help: https://dl.dropbox.com/u/8010163/Whi...e%20Manual.pdf

Thank you for your answer. I do have the instruction booklet but it was of no help. I did shut off and on the main power and pushed the two buttons which were blinking. Now the front door panel is quiet...