Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Tools & Power Equipment (https://www.askmehelpdesk.com/forumdisplay.php?f=334)
-   -   Circular saw blade sharpening (https://www.askmehelpdesk.com/showthread.php?t=67906)

  • Mar 2, 2007, 03:43 AM
    bjjulie1
    Circular saw blade sharpening
    Any pointers on sharpening circular saw blades, can a 3 cornered file be used, what about setting the teeth. Also how about simple tools for sharpening carbide teeth
  • Mar 2, 2007, 08:24 AM
    ballengerb1
    I think you will find poor results if you try to hand sharpen a circular saw, especially carbide. Files are softer than carbide and will not cut. I have given up since I now can buy a new carbide for $12 at the big box stores. I save my old ones for cutting stuff like Duroc and Hardiboard.
  • Jan 7, 2008, 01:13 PM
    rscadwell
    Please feel free to ask anything anytime for your sharpening needs. [email protected] or www.accuratecuttingtech.com
  • Jan 7, 2008, 05:47 PM
    ballengerb1
    RS, and this one is 10 months old.
  • Jan 8, 2008, 05:46 AM
    rscadwell
    Quote:

    Originally Posted by ballengerb1
    RS, and this one is 10 months old.

    And no one else will read this post? Come on man, it is about helping people and giving them a source for their questions to be answered by a professional who does this for a living.

    Thank you so much.
  • Apr 28, 2008, 08:43 AM
    cleanfun
    I pulled the blade out and viced it into a worktable. Used an old rusty fine file on it. Worked quite well.

    Here's a good quicky tutorial on how to sharpen your circular saw blades.
    http://dmtsharp.com/general/basicsha...#circularsharp

    Takes about 15 - 20 minutes. Not rocket science but if you don't see decent results, you simply aren't doing it right.
  • Nov 2, 2010, 04:19 AM
    eyaneyan
    We are the professional manufacturer of circular saw blade grinding machine, please visit our website http://www.hsssaw.com

    Any suggestions & comments are welcome.
  • Nov 14, 2010, 01:48 PM
    AZDesertRat
    For a carbide tipped blade, I use a grinding wheel on my dremel tool. Work slowly making sure it stays cool, and it works really well. If you don't have a dremel, you can get a cheap copy at the local Harbor Freight store that is cheap but works surprisingly well for this kind of work. Good luck
  • Mar 11, 2011, 01:11 PM
    gdberry01
    Just remember, the bevel on the teeth alternate every other tooth. You can use a grinder, set the angle, and be quick careful not to overheat the metal as it will weaken it.

  • All times are GMT -7. The time now is 12:35 AM.