Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Appliances (https://www.askmehelpdesk.com/forumdisplay.php?f=157)
-   -   How to replace a frigidaire gallery gas dryer thermal limiter (https://www.askmehelpdesk.com/showthread.php?t=677961)

  • Jul 2, 2012, 10:22 AM
    raymond s
    How to replace a frigidaire gallery gas dryer thermal limiter
    I have a frigidaire gallery stackable gas clothes dryer. I tried to dry some things and all of the sudden, it would not turn on. I have tried to test every component on the face panel and I think they all checked out OK, maening when tested they al showed a no resistance with an ohm meter. Is there even a breaker or fuse I am missing? I would greatly appreciate any help. Thanks
  • Jul 3, 2012, 08:43 AM
    ChrisPolk
    Did it flash any specific lights, have any audible beeps or show an alpha-numeric error code?
  • Jul 3, 2012, 09:25 AM
    drtom4444
    Look in this manual: https://dl.dropbox.com/u/8010163/Fri...ontrols%20.pdf
    And this one: https://dl.dropbox.com/u/8010163/Fri...20Electric.pdf
    The controls are about the same in all of them. It sounds like it got dirty and blew the main safety. The safeties are wired in series so you just follow the wires from one to the other until you find where the break is. I like to go from the plug terminals and trace from those until I find the break. With the schematics you will be able to do that.

  • All times are GMT -7. The time now is 11:08 PM.