Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Pools - Spas & Saunas (https://www.askmehelpdesk.com/forumdisplay.php?f=261)
-   -   Is 2.5 inches off level too much for an Intex Ultra frame pool 16 by 48 (https://www.askmehelpdesk.com/showthread.php?t=671849)

  • Jun 17, 2012, 06:58 AM
    lassie_46368
    Is 2.5 inches off level too much for an Intex Ultra frame pool 16 by 48
    I brought in sand and leveled it all day and used a 2 by 4 and level like the video's showed. It was level until I put up the pool. Some of the legs on the high water side sunk into the sand and I guess the sand must of settled. I measure both sides and it off 2.5 inches in a small area but 2 inches mostly. Can I get away with it for this year. I thought about taking it down and starting over, but that would be another week with out the pool. My 11 year old daughter had hissy. Do I need to lose any more sleep over this.
    Jan
  • Jun 10, 2013, 06:33 PM
    Tredde
    I have same pool and about the same water difference, how did it turn out for you? Did you drain it or letting it be?
  • Jun 10, 2013, 06:55 PM
    ma0641
    No sleep loss, swim away. Keep the water a little lower on the low side so it won't slop over.
  • Jun 10, 2013, 07:00 PM
    Tredde
    Yea it varies all way around from one post is 40.5" at lowest and 43" at highest but 41.5- 42"mostly everywhere else. I just read so many negative post an then saw yours and it was like reading my mind. If yours lasted all season fine I think I will watch it and see if the level changes

  • All times are GMT -7. The time now is 06:55 PM.