I have a Kenmore Elite Model # 110.600094990 27 inch Electric Dryer - NOW How the heck does one take the Toe Panel Off / or Open this lower section of the dryer? There are two lower edge clips and two upper edge retainers. I CAN NOT get the panel to budge! This is a 7 yr old unit. Thx DAS

Got my own answer - had to depress the top internal edge metal retainer clips X2. All is well. DAS

Diagnostic Guide Link
I found service tech diagnostic guides (PDF format) during an online search. This includes instructions on putting the dryer into test mode in order to check switches, etc. Here are the links:

Gas Dryer:
http://www.servicematters.com/docs/w...%203980053.pdf

Electric Dryer:
http://www.servicematters.com/docs/w...%203979705.pdf