Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Home-Based Business (https://www.askmehelpdesk.com/forumdisplay.php?f=155)
-   -   Cleaning commercial post remodel pricing (https://www.askmehelpdesk.com/showthread.php?t=667949)

  • Jun 6, 2012, 04:11 PM
    tsr9396
    Cleaning commercial post remodel pricing
    Need advice on pricing for post remodel commercial property
  • Jun 6, 2012, 05:00 PM
    Stringer
    Hi trs,

    Get the total sq ft.

    Ask for specifications. If not go over every thing that they want done and take copious notes.

    What sort of flooring; carpet, VCT or other hard floor/s?

    Will there be any large items that you have to dispose of: you will need a dumpster.

    Is there any high work: ceiling piping, vents, ceiling cleaning, etc?

    What is the timeline to finish?

    Is there more than one area and is the cleaning to be done progressive? If so, then after each section is completed have the owner or job sup walk the areas with you and have him/her sign off that the area is cleaned to their satisfaction.

    After you get back with this info I will be able to help you in the pricing, although I may have a question or two more.

    Stringer
  • Jun 6, 2012, 10:21 PM
    tsr9396
    Quote:

    Originally Posted by stringer View Post
    hi trs,

    get the total sq ft.

    **** 2605 sq ft

    ask for specifications. If not go over every thing that they want done and take copious notes.

    ****detail thorough cleaning. Most will be sheet-rock dust, maybe over spray of paint, under counters, inside drawers, baseboards, trim

    what sort of flooring; carpet, vct or other hard floor/s?

    ****ceramic tile, equipment rental will be needed

    will there be any large items that you have to dispose of: You will need a dumpster.

    ****nothing to move or work around

    is there any high work: Ceiling piping, vents, ceiling cleaning, etc?

    ****yes, vents light fixtures, ceiling, ceiling fans, walls

    what is the timeline to finish?

    ****four hours evening, then full day next day

    is there more than one area and is the cleaning to be done progressive? If so, then after each section is completed have the owner or job sup walk the areas with you and have him/her sign off that the area is cleaned to their satisfaction.

    ****two customer areas, service counter area, two bathrooms, kitchen, store room, 12 floor to ceiling double windows, entry area, exterior of stainless steel appliances

    ***how many of my should i have to help with job? Do i need to itemize proposal? Should i offer discount if paid within certain time frame?

    ### thank you so much for your help. Ive been trying to get into the new construction/remodel cleaning for awhile, this may be the door ive been waiting for.

    After you get back with this info i will be able to help you in the pricing, although i may have a question or two more.

    Stringer

    ----------
    ------------
  • Jun 7, 2012, 11:04 AM
    Stringer
    HI Tsr,

    I am a bit busy presently however I will get back to you later this afternoon.

    Stringer
  • Jun 7, 2012, 07:16 PM
    Stringer
    I do not know where you are located and pricing varies for many reasons such as union or non union, other labor costs, how much profit you want, etc. And pricing is always your personal decision in the end of course.

    However I offer this; based upon the info you have provided above I would figure labor at 300 to 400 square feet per hour for the general cleaning, then 'time in' the other items such as walls, vents, piping, etc. This will give you a guide as to how many people you will need. If you are going to perform labor yourself it will save labor costs. The first couple years I was out on as many jobs as I could fins the time to. Many times I didn't sleep for days on end.

    Figure a total of all your labor costs, insurance, taxes, equipment, supplies, admin, desired/competitive profit, etc.

    Add up all these costs and divide it by how many total man hours, this will give you a 'loaded' hourly rate which in my opinion should be somewhere around $18 to $20 / hour. (Only a guess as I don't know your needs/costs) This is contingent upon your costs for example; are you going to need a scissor lift to do the high work? Additional cost for sure. Figure ALL your costs into one lump sum add a percentage of profit.

    Is this building new? If so, are you to do inside and out of the windows? Are there stickers on these windows, takes more time... Things like this have to be considered when pricing.

    This way you will have the leaded hourly rate to check your progression and a total price which is probably what the GC or owner wants.

    Be sure to get a walk through when you finish and a 'sign off' that your work is complete and satisfactory.

    I hope this helps some, any questions? Ask away...

    Stringer

  • All times are GMT -7. The time now is 05:21 AM.