I removed an oven door to make cleaning easier. Now I cannot get it back on. It has 2 hook like catches on each side of the door and there are two bars that I can see to slide the hooks onto, but the hooks won't go far enough in to catch on the bars. Any suggestions or tricks to putting this door back on?

Usually, you open the door to the 1st "stop" and lift.

Reverse to put it back on.

Are the hinges pulled out the to the 1st "stop"

That's usually all there is to it. Sometimes they are tricky, you have to be sure you're not out of square, tilting left or right.

Stew

The You tube video will show you how to remove and refit your oven door. It covers many different hinge types, including the type that you appear to be describing.