How do I set the delay times? I've gone through the manual and can't seem to find it.

Have not had a chance to dig out the manual. The location is after the zone programming and before location 015 I believe.
It is a 12 digit string:
Entry 1 delay XXX
Entry 2 delay XXX
Exit Delay XXX
Bell Cuttoff XXX

I found this on my previous post(when I had a Manual Handy):
You need to enter Programming mode, go to location 005, and enter a 12 digit string(entry 1, entry 2, exit, and bell cuttoff. ## to exit.
[005] System Times
Default
030 I_______I_______I_______I Entry Delay 1 (001-255 seconds) Delay Options”)
045 I_______I_______I_______I Entry Delay 2 (001-255 seconds) Delay Options”)
120 I_______I_______I_______I Exit Delay (001-255 seconds)Delay Options”)
004 I_______I_______I_______I Bell Cut-off (001-255 minutes)

The 030 045 120 004 is the default(times) string for location #5

If you don't do anything, it will be the default values, May be OK as is?

I already have the problem resolved. Thanks for the help, though.