Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Water Filter For The Ice Maker. (https://www.askmehelpdesk.com/showthread.php?t=651493)

  • Apr 16, 2012, 12:05 PM
    pastor1189
    Water Filter For The Ice Maker.
    I have a 2005 Kenmore Refrigerator. Despite stories that the water filter is under the front grill does not apply for my model.
    I must install an inline water filter. In back of the bottom of the refrigerator
    The copper water supply line goes into the pump, from there is goes up a plastic
    Tubing into the back of the ice maker (see picture) Where would you install
    The water filter
  • Apr 16, 2012, 01:40 PM
    ma0641
    Pump? Water supply and ice makers rely on house pressure. A typical install includes a water supply line from the house side, a filter adapter kit that will go from the house supply to the refrigerator water supply with quick disconnects. Your picture did not post.
  • Apr 16, 2012, 02:06 PM
    pastor1189
    Yes the ice maker is already install, and works fine. But the water in the ice cubes taste
    Terrible. I would like to install a filter somewhere. But where.
  • Apr 16, 2012, 02:44 PM
    massplumber2008
    1 Attachment(s)
    Hi Pastor1189

    You would install the ice maker filter anywhere in the water line BEFORE it reaches the refrigerator (see image). Here, you would not install the filter after the "pump" (this is actually a solenoid valve... basically an on/off electric switch that lets water flow)... usually you install the filter just after the shutoff at the water line in the basement (if you have a basement) or, you can install it behind the 'fridge, too if there is room there.

    Finally, be sure to purchase a few extra filters now as these ice maker filters need to be swapped out every 3-6 months, OK?

    Good luck!

    Mark
  • Apr 16, 2012, 03:18 PM
    pastor1189
    Wonderful
  • Apr 16, 2012, 06:09 PM
    massplumber2008
    :)
  • Apr 17, 2012, 04:18 AM
    pastor1189
    Quote:

    Originally Posted by massplumber2008 View Post
    Hi Pastor1189

    You would install the ice maker filter anywhere in the water line BEFORE it reaches the refrigerator (see image). Here, you would not install the filter after the "pump" (this is actually a solenoid valve...basically an on/off electric switch that lets water flow)...usually you install the filter just after the shutoff at the water line in the basement (if you have a basement) or, you can install it behind the 'fridge, too if there is room there.

    Finally, be sure to purchase a few extra filters now as these ice maker filters need to be swapped out every 3-6 months, OK?

    Good luck!

    Mark

    Thanks a million

  • All times are GMT -7. The time now is 10:49 AM.