My MF digger will no longer drive after the transmission oil was over filled. The oil has been drained back to the corect levels but it still will not move. When I engage the forward lever the wheels move it the right direction but only just a jolt and the same when I put it in reverse. I had a problem with the forward reverse solonoid before and wanted to check if this was at fault. When I put it eithr into forward or reverse should I get a voltage of 12v across the spade connectors attached to the solenoid?
Any help or thoughs would be much apprieciated.
Thanks
friends7

Check all fuses with a test light or multimeter. Clean all connectors with abrasive cloth.