Have bought a new hd ed lcd TV but are unable to get any sound we have a perfect picture but have tried everything we can think off

Make and model?

What do you have connected to it?
How is it connected to the TV?

It's a bush 3d lcd model number c47111dvb-3d it is connected with a hmdi cable and a scart lead and into a virgin + box

It's a bush 3d lcd model number c47111dvb-3d it is connected with a hmdi cable and a scart lead and into a virgin + box

Check the settings to make sure the speakers are not disabled. I'm not familiar with the Bush models specifically so I can't tell you exactly where it would be located. Most TVs have an option that either says something like "Internal Speakers" with a choice of on or off. Or they say something like "Internal Mute".

That's what you want to look for. If you can't find it, check the owner's manual (assuming it came with one).

Otherwise, if this does not work, look for a reset to factory default option in the settings and try that. Or again, check the manual for a way to reset the TV.

If all else fails, then it is possible that you will need the TV serviced. If it is still under warranty, call the retailer to see if they service your TV under the factory warranty, and if they do not, see if they have the contact information for the manufacturer.

I had the same problem with my HD Freesat to this TV it apears that the new Bush wouldn't except the old HD Freesat it worked with my PC connected and DVD player but I had to replace my HD free sat for a HD freesat with an HDMI 1.4 output.