I replaced the 3 coils and the igniter. The Problem is I forgot what was what and I saw that the coils were replaced before and there seems to be to many wires that are not needed. Can you send me a wiring Diagram.
Thanks Rick
![]() |
I replaced the 3 coils and the igniter. The Problem is I forgot what was what and I saw that the coils were replaced before and there seems to be to many wires that are not needed. Can you send me a wiring Diagram.
Thanks Rick
I likely can help you but a model would be helpful before I start looking
Here is a manual that should cover most models: http://dl.dropbox.com/u/8010163/Maytag_Dryer.pdf and another one is here: http://dl.dropbox.com/u/8010163/Maytag%20Neptune%20Drying%20Center%20%28DC%29%20Re pair%20Service%20Manual.pdf
I hope they help. In order to get one exactly like your model we have to have a model number as there are hundreds of different models.
| All times are GMT -7. The time now is 02:54 AM. |