Have a 26 hp briggs, we had to replace a crank case gasket, when we put it back together we are no longer getting fuel, we replaced fuel filter, cleaned carb, the fuel pump seems to be working (not sure the flow it should be putting out) any ideas?

Remove the spark plug, squirt a little gasoline or starter fluid into the cylinder, replace the plug, and try starting the engine. Also, be sure to clean or replace the air filter.

On B&S engines, you need to remove the head, clean the carbon from the head, piston, and valves, and replace every 150 hours of operation. The Teflon coated head gaskets are reuseable. Torque head bolts to 140 lb.-inches.