Septic Tank Deflector Plate Keeps Plugging Up
Hi, I have had water back up into my basement three times in the past 18 months. The first two times I discovered it was due to the solids backing up at the inlet to the septic tank. When I climbed down into the tank there is a concrete box at the inlet port of the tank which is what I assume is the deflector plate/box. Both times one I used a crow bar to unplug the solids my drains worked fine. I assume this is happening again because my toilets are not flushing correctly and backing up again. Can I remove (bust) this concrete defletor box? Any suggestions would be extremely helpful. By the way this is a standard country septic system (i.e. Concrete tank and leach bed).
Thanks,
Kirk