Hello - hope someone can help! I have a frigidaire dishwasher Mod# fdb1050rec2. It seems to go a complete cycle fine but the dishes aren't cleaned at all. Soap is left trickling down the door. The pump seems to be running, it does sound there is water on startup and when the cycle is complete it is wet inside. Water pressure at the sink is good. Is there a filter/screen on the water supply that could impact the machines ability? Any help gratefully received. [email protected]

Sounds like a water circulation issue. Start a new cycle and listen for the dishwasher to fill. Open the door and inspect how much water is in tub. It should get close to the heater. If you have water in your tub, close the door and listen for water circulation. If you hear water circulation, inspect the water towers and spray arm clogging.

Rich
www.westernappliancerepairboise.com