Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Which Pump is Best? (https://www.askmehelpdesk.com/showthread.php?t=635625)

  • Feb 13, 2012, 12:37 AM
    HAMID_IR_COM
    Which Pump is Best?
    Dear expert
    I want to choose a pump (High pressure pump, Centrifugal pump or Horizontal submersible motor pumps) for irrigation purpose, which one is more effective form cost, consumptive electrics and technical viewpoints?
    Situation:
    I want to design a conveyance pipe line which conveys water form the river to 260 meter above.
    If you would prefer Horizontal submersible motor pumps, how does it install? Does it need a horizontal shroud in its hoze? How can I get information about this kind of shroud?
  • Feb 13, 2012, 05:48 AM
    speedball1
    Hi Hamid-ir and Welcome to The Plumbing Page. At AskMeHelpDesk.com. You're responding to a 6 year old dead thread so I gave you one of your own. Look in then upper left hand corner of the first post form the date before you post, Thanks
    In my area all we have id shallow well sprinkler pumps but I'll move you up where the other experts can respond. In the mean time I'll research the web for the information you desire. This link may be useful http://www.irrigationtutorials.com/pump.htm Later, Tom
  • Feb 13, 2012, 04:57 PM
    jlisenbe
    For my two cents, it depends on how much water you want and how far down your water is. The more water you need, and the deeper you have to go to get water, the better a sub pump looks. Never needs priming, as well. But with a shallower water table, the jet pump could be a good option. It has the advantage of being about 10 times easier to service/replace.
  • Feb 14, 2012, 05:53 AM
    speedball1
    Hey Jlisenbe. The OP is pulling water from a river and pumping 260 meters,78 feet) to the terminal. He didn't say if this is a horizontal, vertical or simply a raised run. My pump experience has mostly been with shallow well sprinkler systems so perhaps one of you other experts could give him more information. Regards, Tom
  • Feb 14, 2012, 06:30 PM
    jlisenbe
    The river kind of changes things. If you can get power down to the river, then I would think a jet pump would do. I wonder if he means it is 260 meters to the point of use, or there is 260 meters of elevation to overcome. That would be kind of important.

    It really comes down to deciding how much water you need in the sense of gpm. Once you know the elevation and length of pipe run, then you could spec a pump.

    260 meters would be roughly 780 feet. I think, Speedball, you left off the zero.
  • Feb 15, 2012, 02:16 PM
    speedball1
    OOPS! Thanks Jlisenbe. I lose more zeros that way, Cheers, Tom
  • Feb 15, 2012, 09:41 PM
    jlisenbe
    You've earned the right to lose a few.

  • All times are GMT -7. The time now is 01:53 PM.