Have water from hot water faucet but none from cold water faucet. There is NO water coming to the inlet at all. Removed lines all the way to the wall and no water there either.
Do have water to every other faucet in the room and whole house.

Did you shut the water to the house and remove the angle stop and, holding a pan over the open stubout, turn the water back on for a second to see f there was pressure in the line? Let me know, Tom

Yes, we have done that. Now we have removed the faucet and are checking to see if there is a reason in the faucet itself. Thank you for the input. Jerry

Hi Jerry,
If you did all this,

Quote:

---

Senior Plumbing Expert





Join Date: Jan 2003
Location: Sarasota, Fl.
Posts: 24,078
Reputation score: 8690
Did you shut the water to the house and remove the angle stop and, holding a pan over the open stubout, turn the water back on for a second to see f there was pressure in the line?

---

OK! You have the faucet disconnected. Can you get water pressure from the supplies? You haven't answered my question.
Is there pressure to the angle stops? Ya got the faucet removed. Turn on the angle stops and let me know if you have pressure. Back to you. Tom

We have pressure sometime and then it disappears the next time. We are now in the process of re building the guts in the faucet. But we do not know why we have pressure sometime and then we lose it again.

Jerry