Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Home Safety & Security (https://www.askmehelpdesk.com/forumdisplay.php?f=158)
-   -   DSC pc1832 installation/programming (https://www.askmehelpdesk.com/showthread.php?t=628546)

  • Jan 17, 2012, 04:00 PM
    brookman
    DSC pc1832 installation/programming
    I'm installing the DSC1832 in my home. Here's how I wired:
    1) Zone1= upstairs motion (4wire) red to Aux , blk to Aux-, yellow to Z1, Green to Com.
    2) Zone2= downstairs motion (4wire) " " " " " " Z2 " " "
    3) Zone3= upstairs smoke (4wire) red to Aux , blk to Aux-, yellow to Z3, Green to Com.
    4) Zone4= upstairs smoke (4wire) "
    3) Zone3= upstairs smoke (4wire) red to Aux , blk to Aux-, yellow to Z3, Green to Com.
    4) Zone4= upstairs smoke (4wire) " " " " " " " Z4, " " "
    5) Zone5= downstairs smoke (4wire) red to Aux , blk to Aux-, yellow to Z5, Green to Com.
    6) Zone6= downstairs smoke (4wire) " Z4, " " " " " " " Z6, Green to Com.
    7) Zone7= Temp. Alarm (4wire) red to Aux , blk to Auz-. Yellow to Z7, Green to Com.

    I just can't seem to figure out the programming for this? Can anyone help?
  • Jan 19, 2012, 07:38 AM
    Stratmando
    In location 001 you need to program the 2 digit zone description for each zone in a 16 digit string of the 32 as this location now goes to 16 zones.
    I don't see a door contact for entry. You can Program Motion as a perimiter and give it a delay to allow time to dissarm. If you had a Wireless fob for arming. Motions could be all Interior.
    Can you get into Programming?
    Also, If you use a PGM output, it will allow resetting of your smokes.

  • All times are GMT -7. The time now is 07:05 AM.