Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Cars & Trucks (https://www.askmehelpdesk.com/forumdisplay.php?f=41)
-   -   88 acura legend v6 (https://www.askmehelpdesk.com/showthread.php?t=621955)

  • Dec 23, 2011, 08:55 PM
    jmat3886
    88 acura legend v6
    I have a 88 acura legend v6 it went dead when I put it in park I replaced the distributor and it started and ran for about 3 seconds and died. Since then I replaced the coil the camshaft position sensor plugs and wires and still no fire to the plugs and it won't start
  • Dec 23, 2011, 10:08 PM
    smoothy
    What codes are the ECU flashing?
  • Dec 24, 2011, 06:30 AM
    TxGreaseMonkey
    If the Check Engine Light comes on for 2 seconds and then goes out, when the ignition switch is turned to ON (Position II), then the problem is likely distributor related. Only install a genuine Honda distributor housing (all others are suspect), where it's fine to install an aftermarket Ignition Control Module (ICM) and coil to keep the cost down.
  • Dec 24, 2011, 09:17 PM
    jmat3886
    The ecu says coolant temp sensor and the check engine light stays on.
  • Dec 24, 2011, 10:39 PM
    jmat3886
    I fixed the main relay and now the check engine light goes off

  • All times are GMT -7. The time now is 11:44 PM.