Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Cars & Trucks (https://www.askmehelpdesk.com/forumdisplay.php?f=41)
-   -   94 Ranger 2.3 Won't start (https://www.askmehelpdesk.com/showthread.php?t=613501)

  • Nov 19, 2011, 06:16 PM
    bigewhat
    94 Ranger 2.3 Won't start
    My 94 2.3 will not start. Coils changed,plugs changed... no check engine light on. Been running rough here and there, sometimes worse than others. Sometimes I would have to hold the key till it started so I just changed the crank position sensor and it cranks better but will not start
  • Nov 19, 2011, 08:52 PM
    TxGreaseMonkey
    Victory is close. Replace the Ignition Control Module (ICM). I recommend replacing them every 120,000 miles or 10 years, whichever comes first. They are problematic components. If the problem persists, change the Camshaft Position Sensor.
  • Nov 20, 2011, 09:58 AM
    bigewhat
    This model doesn't have the camshaft sensor, its not a California model
  • Nov 20, 2011, 01:00 PM
    TxGreaseMonkey
    The problem is likely with the ICM, anyhow. I work off the information provided--sometimes, it's not the best to begin with.

  • All times are GMT -7. The time now is 05:57 AM.