I have Whirlpool dual combo washer/dryer Model LTG6234AW1. Washer or dryer does not start. I checked the fuse box and did not find any issues there. Is there any other fuse or anything else I need to check?

Thanks in advance.
-Nick

Hi Nitish and welcome, You need to check for power where the washer and dryer plug in, do you own a volt/ohm meter?

Yes, I have volt/ohm meter? Check for the power to plug?

Thanks,
-Nit

Is there a fuse in the top control panel which might have blown off?

Hi again Nitish, use your meter and check for voltage where the washer/dryer plugs in, make sure you have power there. Good luck

Thanks. I checked the power with multimeter and did not find any issues. Anywhere else to look at?

I see no fuse, With both not working I would keep reading the power to where the washer hooks-up, making sure of good connections and no burnt wiring.


Nick, does the light in the dryer burn?

Hi,

I have checked voltage to the plug. I have opened the control panel and verified power to the control panel. I have also checked 'push to start' switch and dryer switch for continuity and both are operational. But Washer or dryer does not start. Is there a common fuse in the unit which might have blown? Is there common connector or part that controls both washer & dryer?

Thanks,
Nitish

No common fuse, sounds like you've lost power, really odd that both machines quit at same time.

You did check for power at the dryer connector where the washer picks up it's power?

Thanks. There is no light burning in the dryer.