how to time a 1992 toyota 4x4 pickup with a 22Re engine

Directions are on the label attached to the underside of your hood

Use Google or other search engines otherwise check with your local Toyota dealer

It depends on the reason for timing it. Did you replace the chain, or distributor? If replacing the distributor, then put timing mark on the harmonic ballancer on 5 degrees before top dead center, make sure that #1 is on tdc (both rockers should be loose) if not rotate one full turn bact to 5 degrees, then install the distributor with the rotor pointing at about 10 o clock (when looking strait over the distributor) connect the cap and all the wires. Firing order is 1-3-4-2. Adjusting is a little harder. Requires a few special tools. But the specs are 10-14 degrees before TDC with a warm motor idling about 750 rpm