PLEASE HELP, replacing condenser fan motor, old one is 2spd new one is single speed, the old motor wiring is as follows: red wire to t1 , brown wire to capacitor, black wire to hi terminal on fan control board, blue to low terminal on fan control board. The new motor has wire diagram on sticker that shows: white wire to L2, black wire to L1,brown wire to 7.5 cap, brown/white wire to other side of cap. It also shows optional 3 wire hook-up: brown/white-insulate, brown wire to cap, white wire to other side of cap(shows wire from this terminal to L2 terminal), and black wire to L1 terminal. Someone please tell me how to hook up this new motor.