Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Pull up diverter tap is not staying up (https://www.askmehelpdesk.com/showthread.php?t=603568)

  • Oct 13, 2011, 03:19 PM
    rebeccathornton
    Pull up diverter tap is not staying up
    Hello!

    The diverter knob will not stay up and even if I try with all my strength to hold it up, only part of the water is being diverted into the shower head, and lots is still coming through the tap into the bath.
    I have tried to look for advice on the internet I cannot find anything that talks about this problem when the diverter knob is attached to the taps and not the wall.

    Please help!
    Thanks.
  • Oct 13, 2011, 03:37 PM
    afaroo
    You need to replace the spout it is easy and cheap, Thanks.

    John
  • Oct 13, 2011, 03:38 PM
    mygirlsdad77
    Agree with John. Replace the complete spout and you will be all set.
  • Oct 13, 2011, 03:41 PM
    speedball1
    2 Attachment(s)
    The reason you can't find a article on repairing a diverter spout is that they're so cheap we simply replace them. Look down at the bottom of the spout next to the wall. If there's a small square hole with a Allen Head screw you have a sliup-on spout ,(see image) If not then you have a threaded diverter spout, (see image) Go into HD or Lowe's and replace it. Good luck, Tom
  • Oct 15, 2011, 08:22 AM
    rebeccathornton
    The spout and the taps are all connected together, so I guess I need to replace the whole thing?
    Thanks again
  • Oct 15, 2011, 08:52 AM
    speedball1
    Quote:

    The spout and the taps are all connected together,
    Never saw a diverter spout and valve all in one piece. Can you post a picture? Regards, Tom
  • Oct 15, 2011, 03:15 PM
    mygirlsdad77
    1 Attachment(s)
    Oh, Ive seen them, usually in trialer houses. Never worked on one though. It may be possible to repair the diverter, but I just can't say for sure.
  • Oct 17, 2011, 04:06 AM
    rebeccathornton
    1 Attachment(s)
    Sorry took me a while to sort out a photo!
    I'm hoping I've attached it successfully...

    :)
  • Oct 17, 2011, 04:04 PM
    mygirlsdad77
    Not sure where to start on that one. May be time for a new fuacet. Can you access the under side of the faucet to change it out. Or if you can find a brand name anywhere, you could contactl the manufacturer and send them that pic and see if they do indeed make a repair kit for the diverter.
  • Oct 17, 2011, 04:19 PM
    speedball1
    If you're looking to replace your faucet click on this linkL Tub Faucet with Shower Diverter for Mobile Home Manufactured Housing
    Good luck, Tom
  • Oct 18, 2011, 02:46 PM
    rebeccathornton
    Think I'll have to get a plumber in then!
    Many thanks to everyone.
  • Oct 18, 2011, 03:49 PM
    mygirlsdad77
    Please send us a pic of the new install when done. Good luck.
  • Oct 31, 2011, 04:58 AM
    emweaver
    We have the same taps and same problem, what did you do in the end?
  • Nov 1, 2011, 01:26 PM
    rebeccathornton
    At the moment, we've been taking a lot of baths lol.
    We're hoping to get a plumber in soon...

    Will let you know the verdict.
    If you get any where, let us know!

  • All times are GMT -7. The time now is 01:23 PM.