I bought a home three years ago new. This morning my heater would not work. The upper evac motor was running. Checked thermostat and was set to auto and heat. I had to kick the breaker to get it to stop running. When I kicked the breaker back on it started to work. Evac fan, gas click, glow plug, then blower. I did notice the evac fan was still running. Don't know if that is normal. The furnace kicked off and the evac fan did not and it kept running. I also noticed that there was water draining from the unit and the grey tray on the side had water in it. I have no idea what to do about this, any ideas our help would be appreciated. Thanks