I have a Coleman Evcon model# dgat056bdd. The fan runs but does not blow air through vents. When it first started you could turn off for little while and it would work OK for a little while.


Thanks

Have you checked the filter? A badly blocked filter would restrict air flow. If this is an old external motor drive, the belt could be broken. Possible blockage in main supply, fiberglass delaminated and is covering the duct. What kind of ductwork do you have?

Got to digging around today. Air conditioner works fine for about 45 minutes. Air coming out is cold. What I found the line going to the furnace is frezzing up. Outside unit running good, Any thoughts? Could the line be plug somehow? How would you open the line up?


Thanks