Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Mechanical Engineering (https://www.askmehelpdesk.com/forumdisplay.php?f=494)
-   -   What temper astm brass tube should I use for a hydraulic cylinder (https://www.askmehelpdesk.com/showthread.php?t=593249)

  • Aug 17, 2011, 11:34 AM
    KATHERINE FREDE
    What temper astm brass tube should I use for a hydraulic cylinder
    The cylinder ranges from 150 psi to 1500 psi, my choices are drawn h58, or hard drawn h80. Can I use either? Please advise, thanks kathy

    • All times are GMT -7. The time now is 10:37 PM.