Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Tools & Power Equipment (https://www.askmehelpdesk.com/forumdisplay.php?f=334)
-   -   I have a 14 hp briggs and stratton (https://www.askmehelpdesk.com/showthread.php?t=579329)

  • May 31, 2011, 06:37 PM
    lildogman
    I have a 14 hp briggs and stratton
    About 2 seconds after start it spews gas and oil out of the return on the intake. I worked fine a week ago I try to start it today and that happened. What confuses me is that the engine actually starts about 3 seconds after it starts spewing then it cuts off because of all the fluid going into the carb. I have no idea even where to start. Any help would be grateful. Thanks
  • May 31, 2011, 08:28 PM
    DG

    Check your oil and see if its over full , you may have gas going into cylinder block, /
    Sounds like dust or debri in carb, may need to be removed and cleaned. Luck
  • Jun 1, 2011, 06:07 PM
    lildogman
    I've checked the oil. All I c in there is gas does that mean the engine is blown r is it an easy fix
  • Jun 2, 2011, 05:29 AM
    DG
    Sounds like dust or debri in carb, may need to be removed and cleaned. Luck
    __________________

  • All times are GMT -7. The time now is 07:08 AM.