Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Tools & Power Equipment (https://www.askmehelpdesk.com/forumdisplay.php?f=334)
-   -   Husky Powerwasher 1750 (replacing On/Off switch) (https://www.askmehelpdesk.com/showthread.php?t=578058)

  • May 24, 2011, 03:26 PM
    madcat2010
    Husky Powerwasher 1750 (replacing On/Off switch)
    Ae there Schematics to replace the switch, it got popped off from the leads and I don't know where the leads go to on the switch back I got 4 leads and 4 colored wires. Which go where?
  • May 24, 2011, 08:01 PM
    ballengerb1

    Is this your part http://www.huskypowerwasher.com/prod.../meci80243.jpg. If so when you buy an OEM part from Husky it comes with directions
  • May 25, 2011, 02:50 AM
    pattyg2

    Connect the black and white to the 1A and 2A (on side) then connect the gray and tan to the 1B and 2B, Black to 1A and Tan to 1B



  • May 26, 2012, 03:26 PM
    glasslaw
    Just bought an on/off switch from Husky (FNA Group). No instructions. Different from picture.

    • All times are GMT -7. The time now is 01:32 PM.