Hello, we moved into a house that has a hunter fan with a light. To make a LONG story short we needed a remote. I took the shorter and less expensive route and bought a universal remote. I didn't watch which wire went to anything. I know the green wires are the ground. The wires coming out of the ceiling are black, red and of course the green. The wires on the fan are black&white, black, and white. On the remote there is black&white-light out, fan out-red, common-out - white, common in- white, live in -black. PLEASE HELP

"wires comming out of the ceiling are black, red and of course the green" so there is no white neutral wire, correct? This would be quite unusual since you need a neutral. Black is typically hot and the other red could/should be hot too but maybe from a second switch, a 3 way. Is there a second switch?

We have the one green that is screwed in and a green one coming out of the ceiling, as well as the black, and a red coming out of the ceiling.

FROM THE FAN

Green wire, a black & white stripped, a solid black wire, and then a white wire

What is your question?

Sorry, I had sent my question around 930 this morning, anyway, we are trying to connect a universal remote to our hunter fan. I didn't watch or get a chance to label everything. Coming out of the ceiling is:
ONE GREEN WIRE SCREWED IN -obviously that is the ground
ONE BLACK WIRE
ONE RED WIRE
ANOTHER GREEN WIRE, BUT SLIGHTLY A LIGHTER GREEN _ NOT SCREWED IN

Coming out of the fan:
BLACK AND WHITE WIRE
BLACK WIRE
WHITE WIRE

Coming out of the remote:
BLACK & WHITE WIRE - LIGHT OUT
RED - FAN OUT
WHITE- COMMON OUT
WHITE - COMMON IN
BLACK - LIVE IN

HANG ON: OUT OF THE FAN:
GREEN
WHITE
BLACK & WHITE
BLACK

There is one green wire screwed in- obviously the ground, but then another green which is a lighter shade coming out of the ceiling.

OUT OF THE CEILING:
Black
Red
One lighter green
Green screwed in

FROM THE FAN:
Black & white
Black
White
Green

FROM THE REMOTE:
Black & white - light out
Red - fan out
White- common out
White - common in
Black - live in

THAT IS EVERYTHING THAT WE SEE. THANKS

Not sure if my response went to the people helping me or not, so I am going to post this again.

I messed up taking fan down to hook up universal remote.

OUT OF CEILING:
Green screwed in - obviously ground
Black
Red
Another green (a lighter shade)not screwed in

OUT OF THE FAN:
Green
White
Black
Black & white

OUT OF THE REMOTE:
White - common in
White - common out
Black - live
Black & white - light out
Red - fan out

That is everything I see. PLEASE HELP, THANK YOU MUCH

>Threads Merged<

I am confused by all of your posts and answers. The thing in the canopy is the receiver, in your hand is the remote, it has no wires

Yes you are correct. I am getting so frustrated. We hooked up all different kinds of ways. Now, the light shut off and the fan is going. Light seems dim, not bright. We ended hooking up some stuff tolive wire

From ceiling: green with screw-groung, red, black, and light green
From fan: green, white, black/white, black
From receiver: black-live, black/white - light out, red- fan out, 1 white - common in, 1 white - common out