Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Tools & Power Equipment (https://www.askmehelpdesk.com/forumdisplay.php?f=334)
-   -   Gap setting (https://www.askmehelpdesk.com/showthread.php?t=576369)

  • May 14, 2011, 12:36 PM
    mental48
    Gap setting
    I just replaced the fly wheel on a 6hp BRIGGS push mower. My question is,What should the coil to fly wheel gap setting be? I'm getting some re-coil kickback.
  • May 14, 2011, 01:00 PM
    parttime

    Mental I don't know the exact measurement, I always used a business card. Good luck
  • May 14, 2011, 01:02 PM
    parttime

    Seems the gap is .010 to .014
  • May 14, 2011, 03:45 PM
    ballengerb1

    That or a matchbook cover should do it.
  • May 14, 2011, 06:54 PM
    DG

    If your getting kick back , could be you didn't get the flywheel key seated good.
    Luck

    • All times are GMT -7. The time now is 07:49 AM.