Last year it stopped working no noise nothing just stopped. It was the end of the yrs and I did not worry about it. But now I am try to get it to work. I have check all the power even put in all new breakers and then checked them to make sure I did not by a bad one. I took the front cover off and checked all the wiring and everything looked good. I then pushed the black reset utton located in the middle of the frame the wires are connected to. The compressor and fan come on when I release the button it stops. Then is all the information I have can anyone point me in the right direction.

Thanks in Advance

Sounds like you have a low voltage problem,, the small thermostat sized wires that go from the furnace and run to the outside condenser unit, trace carefully from one end to the other see if you have a chewed or broken wire somewhere