Kenmore Elite model 110.16922504
Issue washer just started making a clicking sound during the agitating cycle. The clicking noise is constant and is coming from below the tub.
What can be causing this and what must I do to fix the problem..
Also, just noticed on doing second load that the spin cycle completes and the washer starts adding water again. The knob shows that it is on a single rinse cycle only. Any ideas?

Thank you,
Gary

If it is a rapid clicking you probably have something in the pump or the motor coupler is worn out. Tip it back toward the wall and support it and get down there between the motor and transmission. That is were the coupler is located. You should be able to tell if it is in good condition by trying to turn it by hand. If you see a pile of black dust on the floor, just order a new coupler and get back to us. As for starting to fill up again. Sounds like a bad timer.