95 ford escort has a single click sound when I depress the clutch, goes into gear OK though

Thoughts:

. Worn throw-out bearing.

. Apply Super Hi Temp Urea Grease, Honda P/N 08798-9002, to the ball-end of slave cylinder and inside release fork dimple. It retails for $14.14 for 1.75 ounces. Apply brake assembly lube, or equivalent rubber grease, to the inside surface of the slave cylinder boot. This attention to detail is necessary--don't substitute other lubricants. There are no acceptable substitutes for applications requiring urea grease.

. This link might help:

https://www.askmehelpdesk.com/cars-t...ml#post1833643

. It's a good idea to bleed the hydraulic clutch every 2 years. They work smoother and last longer. Don't overfill, however.