Where is the board on this gas stove GE Spectra Profile XL44. I need to remove the board and use an eraser on the contacts. The F7 error message comes up with a beeping noise.
Someone fixed this before this way but I wasn't there to see where it was.
Thanks Bryan

Use of an eraser to clean the contacts is only a temporary solution to the problem. A permanent fix was developed by Charlie Popeck, a professional engineer. It involves inserting a piece of paper between two ribbon cables to eliminate the possibility of short circuit between the two cables. The 30 minute procedure is described (including photos) at the web site

The Dreaded "F7" Error - FixYa