Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Cars & Trucks (https://www.askmehelpdesk.com/forumdisplay.php?f=41)
-   -   Chevy Equinox (https://www.askmehelpdesk.com/showthread.php?t=558003)

  • Feb 26, 2011, 09:09 AM
    chevyequinox
    Chevy Equinox
    Chevrolet equinox 2005 abs light is on. After scanning the speed sensor(at passengers side) has been replaced but afterwards I have the same problem . The pedal keeps vibrating with a strange noise till the abs light goes on.the brakepads has also been replaced.
    What is the solution?
  • Feb 26, 2011, 10:38 AM
    TxGreaseMonkey

    . Clean all ABS sensors with WD-40 and a rag.

    . Check the brake calipers. The pistons may not be retracting properly. Lubricate the caliper pins with silicone grease. Replace calipers and pads, if necessary.

    . Change all of the brake fluid (Valvoline ABS Brake Fluid). This is extremely important on ABS. Do it every 2 years.
  • Feb 28, 2011, 08:40 AM
    CaptainRich
    Quote:

    Originally Posted by chevyequinox View Post
    chevrolet equinox 2005 abs light is on. after scanning the speed sensor(at passengers side) has been replaced but afterwards i have the same problem . the pedal keeps vibrating with a strange noise till the abs light goes on.the brakepads has also been replaced.
    what is the solution?

    What was the actual Diagnostic Trouble Code (DTC)?
    When does this condition occur?

  • All times are GMT -7. The time now is 05:14 PM.