Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Appliances (https://www.askmehelpdesk.com/forumdisplay.php?f=157)
-   -   Kenmore elite dishwasher model 665.16293400 (https://www.askmehelpdesk.com/showthread.php?t=555889)

  • Feb 19, 2011, 01:04 PM
    cstum7018
    Kenmore elite dishwasher model 665.16293400
    Door will not open properly. Falls down
  • Feb 19, 2011, 01:39 PM
    ma0641
    If the door "falls down" the door return springs are either disconnected or broken. Remove the bottom panel and you should see the springs at the door corners or at least that's where they should be. They are about $7-8 each. One end connectrs to a door bracket and the other to the DW frame.
  • Mar 20, 2011, 09:17 AM
    Applianceaid
    Hello,

    This model has a very common issue. The link cable that connects the spring to the door hinge breaks. This thin cord will often rub on the side of the cabinet and fray.

    You can purchase a new link kit from the parts link below.

    Kenmore Dishwasher Link Kit

    The dishwasher needs to be pulled forward enough to hook the spring and cable back together. One end of the spring connects to the rear frame of the dishwasher and the other end connects to the link cable. The link cable goes around the pulley on the side and rests on the end of the hinge. I know this unit well and can answer any repair related question you have on it.

    Appliance & Refrigerator Repair
  • Oct 18, 2012, 01:54 PM
    Mstockton
    Quote:

    Originally Posted by Applianceaid View Post
    Hello,

    This model has a very common issue. The link cable that connects the spring to the door hinge breaks. This thin cord will often rub on the side of the cabinet and fray.

    You can purchase a new link kit from the parts link below.

    Kenmore Dishwasher Link Kit

    The dishwasher needs to be pulled forward enough to hook the spring and cable back together. One end of the spring connects to the rear frame of the dishwasher and the other end connects to the link cable. The link cable goes around the pulley on the side and rests on the end of the hinge. I know this unit well and can answer any repair related question you have on it.

    Appliance & Refrigerator Repair

    Hi... I picked replacement parts for mine today, broken cord, plastic hanger, etc... butvim at a loss to determine where to hook back end of hook... there are notched cutouts in middle of frame but then cord is too slack and might even slip off spring... and if I'm to use hole in very back corner of frame it seems like spring tension with door closed will still be under great force (not even sure I can connect it if I use that hole)... that this would be easy part... completely stumped... are you able to help?. much thanks, Mike

  • All times are GMT -7. The time now is 12:43 AM.