Hunter Ceiling Fan with remote, 4 wires from ceiling box, 3 wires on remote box:
"I am installing a Hunter Ceiling Fan with remote, into an existing ceiling fan location: Black, Red, White and Green wires come out of the ceiling box, two switches on the wall to turn on lights and fan(speed). New fan has remote box with Black and White wires: Connecting black to black and white to white, red capped off, no lights, no fan. Connecting red to black, white to white, black(ceiling) capped off, fan(with or without remote) and no lights. How do I wire this ceiling fan so that the fan and the lights work?"
Comment on ballengerb1's post
Yes, I am following along, but capping the red wire and black to black/white to white/green ground gives no fan and no light ! Wires coming out of receiver are black/white, red and white; as per the manual these are wired to the "fan" wires as black/white to black/white; black from fan to red on receiver and white to white. Does it matter that the "light" on the fan will be in circuit with two other lights ?