I replaced the EGR and Oil Cooler on a 2005 Ford F 350 with a 6.0 liter engine,
After completing work!the engine won't start and all electrical wiring, injectors etc
Is plugged in with oil and coolant in the system! Has anyone had or seen this issue before?
Donald

Run through the tests in the link below--something may show up:

https://www.askmehelpdesk.com/cars-t...ml#post1415281

Had same problem the computer on driver side valve cover has 3 plugs underneath it that came unplugged and make sure the ground wire on the drivers side very back it the wire loom that goes to computer on that valve cover is still attached to ground